Framing and Mounting

There are many frame combinations available that will allow us to mount our Soundproof Windows to virtually any wall surface.

The drawings below represent our most common mounting combinations. Regardless of frame selected, they will "disappear" and seem to be part of your existing window. Our near-invisible frames are excellent for historical preservation projects.

Note: the existing windows are not shown in the illustrations below.

Surface Mount

Used to add additional air space to maximize noise reduction.

Depending on the severity of the noise and the size of the
air space, we may recommend this style. Here, we mount the Soundproof Window on the wall, usually over the edge of the existing window opening.

This configuration is also excellent for use with tilt-in windows.

Frame is 7/8" tall and 1-1/8" deep. Attachment fin is 3/4".

Surface Mount With Sill

When there is a sill, we rest the Soundproof Window on it,
and surface-mount the window to the opening.

Flush Mount

This Soundproof Window mounts flush with the inside wall.

Frame is 7/8" tall and 1-5/8" deep.

Often, this mounting can protrude into the room for additional
mounting or air space.

	Wall (existing window not shown)
	Soundproof Window Frame
	Foam/Gasket Material
	Window Track
	Caulking Joint
	Glass Panel (tightly seals and is movable/removable)
	Attaching Screw

Soundproofing Treatments | First Visit | Acoustical Products | Contact Us | Home